The HiTi CS310 Single Sided Photo ID Card Printer is suitable for printing corporate Access Control and Photo ID cards. World-leading HiTi colour technology provides photo realistic quality on every print The HiTi CS310 high speed single-sided, color or monochrome card printer allows for continuous printing without duty cycle control, while ribbon breakage protection technology protects your investment in consumables. The RAC2000PN 2 door access control control panel with Ethernet is a cost effective, yet feature rich access control solution for medium sized installations that require real time on site or remote operation, event recording, programmable duress, multiple access modes The S02M Maglock features 1200lbs holding force and 12 or 24 Volt DC operation. (AC input possible through a rectifier). Both voltages have the same holding force without temperature rise. The magnetic bond sensor indicates that proper bond exists between the magnet and the armature and that the door is locked. This can be monitored remotely to provide assurance that the door is secure. There is an LED for visual indication of the lock status. The STT804F 4 Channel Passive Video Balun enables the transmission of CCTV video signals to distances of 330 metres using economical CAT5e cable. The STT804F supports all CCTV cameras, monitors, DVR's, CCTV capture cards and most other video devices that normally utilise 75 Ohm coaxial cable. Up to 4 CCTV cameras can be transmitted on a single CAT5e cable. The video input is by either RJ45 or screw terminals, and the output is by BNC male connector. The H2TAG Tecom Format Access Control Smart Fob is a stylish read/write proximity keyfob compatible with Tecom Format Proximity Readers. The tags can be supplied with a printed number if required. The AST27XDN 27x Digital Zoom Day/Night Camera has a built in 3.6-97.2mm lens with RS485 control and On Screen Display (OSD) to assist with in the field setup. The AST27XDN is a full body, or box style CCTV camera that provides a high resolution 480TVL image and requires a minimum scene illumination of only 0.5 lux. The camera can be setup in the field via the control buttons on the rear of the body. Zoom can also be controlled remotely via an RS485 controller. DDS Amadeus5 offers sophisticated access control and alarm management solutions for all size installations and levels of complexity. Amadeus5 is the most advanced online security software on the market today that is simple to use. The huge system capacity enables an unlimited number of cardholders, controllers, readers, supervised alarms, outputs, video servers, operators, access groups and security levels. The AST69M2A IR CCTV Camera is housed in a weatherproof enclosure and features a varifocal lens, 540TV lines of resolution and an Infra Red range of 40 metres. The camera is supplied with an integral cable managed bracket suitable for mounting on most surfaces.
Contact Us

To get in touch with a Sales Rep call us now on 1300 351 783 or Click HERE to send us your enquiry by email.
 
Login/Register
Search
Request Info

If you require more information click CLICK HERE and complete the simple web form.
 
Live Chat

Want to chat with us LIVE on Meebo? Click HERE to say gidday, ask a question, get a price, whatever.
 

ADVENT Network Access Control Manager

Description

ADVENT is CS Technologies flagship network access control software product. ADVENT provides both the installer and system administrator a user-friendly way to control the CS network access control system. The CS network access control system is designed to provide a cost effective solution plus the ability to seamlessly expand and adapt to future growth needs. The CS 6100 4 Door Access Controller can be added to control doors and elevators and can be easily integrated with alarm and energy management systems.

Software Features

  • Windows XP compatible
  • Requires a serial port or USB port
  • Password protected login
  • Operator types - restrict user functions
  • Up to 50 PC's can be networked running Advent with controllers connected to the workstations
  • Modem or TCP/IP connection capability
  • Separate alarm and event log window
  • Area armed and disarm windows
  • Card activation / deactivation by date and time
  • 12 definable cardholder note fields
  • Programmable macro buttons - to perform typical functions such as open doors
  • Automatic daily database backups
  • Customisable (insert your own company logos)
  • Email / SMS alarms
  • Photo iD integration
Registered ID-Web members get exclusive access to additional resources including:
Brochures
Installation Manuals
Upload/Download Software
Up-to-Date Pricelists
Regular Emails with Product Alerts
Discounted prices at our Online Store
Direct Access to our Online Store

Login or Join Up

If you are already a My-ID member Login Here.
If you are not a member Click Here, complete the simple form and join today.
 

System Features

  • Locations: Up to 50 locations each of which can have 128 controllers each of which can have 4 doors. This gives the system a total potential capacity of over 25000 doors
  • Controllers: Each controller now has capacity for up to 4 doors, 250 alarm areas, and 250 alarm inputs. Doors can have any reader technology. (requires r3 universal firmware)
  • Time Zones: The system has capacity for 1000 ‘standard’ time zones and 1000 ‘extended’ time zones.
  • Access Levels: The system has capacity for up to 16000 access levels. Each user in the system can have up to 50 of these access levels assigned to them.
  • Parking Control: Each controller has capacity for up to 63 parking ‘occupancy’ levels. Each level has a defined occupancy; when that number of people have entered no more from that group are able to get into the car park until someone from that group leaves.
  • Antipassback: Extensive antipassback capabilities including the ability to define any reader as Entry, Exit, Inside, Outside or Don’t care. Antipassback can be system-wide. Also supports timed antipassback for car park and catering control.
  • Programmable Macros: Any event in the system can be programmed to cause any other event. Useful for lighting control, tagging users, central control of outputs.
  • Energy Management: Alarm areas can be used to control lighting and air conditioning to ensure that energy is not operating when the area is unoccupied.
  • Users: Up to 20,000 users per controller. Access at any reader is instantaneous even with thousands of users within the controller.
  • Credentials: Any credential can be used with the system. A full 32-bits (site code AND card number) is stored for every user. Site codes can be mixed, the system supports non-site-coded credentials like PIN numbers and iButtons.
  • Readers: The system supports a wide variety of readers including iButton, mag-stripe, wiegand, proximity, presco and biometric readers like the CS fingerprint reader and the Iris scanner technology.
  • Elevators: Elevator control is supported with up to 250 floors per elevator. Elevator access levels allow restriction of individual floors by time. It’s possible to trigger floors from intercoms (with a different trigger time to when triggered by a card read) and the system supports full floor destination reporting and single floor selection.
  • Inputs & Outputs: Any controller is fully expandable using additional input and output boards. Inputs and outputs can be added on in pairs at very low cost. Each controller supports up to 250 relay outputs and 250 inputs.
  • Alarm Reporting via Email: When alarms occur they can be easily emailed to anyone for verification.
  • Integration with Alarms: It’s possible to control alarm areas via the access control system. Users can arm and disarm individual alarm areas from access control readers, and it’s also possible to restrict access so that certain users are unable to access an area unless the alarm is turned off.
  • Network Integration: Locations in the system can be distributed across a local area network, enabling a large integrated system to be operated from a central point using existing infrastructure.
  • Mix Local & Remote Sites: Locations can be connected directly to any PC in the network or connected via dial-up modem from any PC in the network allowing extensive flexibility in the configuration of the system.
  • Multiple Workstations: The system supports multiple workstations for connection of controllers and reporting from any location in the network.
  • Holiday Periods & Types: The system supports up to 20 holiday periods. Each period has a starting date and time and ending date and time allowing lots of flexibility in the definition of holidays. The system also supports different ‘types’ of holidays so that different tenants or branches of a site can have different holidays applying.
  • User Interface: The software is very easy to use, based on the functions carried out by a premises manager rather than being dictated by the hardware. Operators need not understand about controllers etc because the programming is based on ‘doors’ and ‘floors’ rather than controllers. Elevator programming in particular is very easy as elevators are grouped into banks meaning that programming of individual floors is done once per bank of elevators rather than individually per elevator.