The Visonic DA5 is a passive infrared motion detector designed for use with access control and automatic door opening systems. When motion is detected, the DA5 relay output provides signals activating the door opening mechanism. For maximum flexibility, the output activation time is user adjustable between 1 and 60 seconds. The DA5 is designed for easy installation, with options for over-the-door wall mounting or ceiling mounting. The AST515NH2 IR Dome CCTV Camera is housed in a vandal resistant and weatherproof enclosure. It features a 3.5-8.0mm varifocal lens, 540TVL resolution and an Infra Red range of 30 metres. The AST515NH2 is a professional CCTV camera in a convenient package. The zoom and focus controls are accessed externally, while the camera can be adjusted in all directions within it's base. It is suitable for wall or ceiling mounting. The DDS satellite card STLO has 16 additional outputs. Up to three satellites can be connected to each MEGA, TPL or DS216 controller via the second RS485 communication bus, through a single twisted pair cable over a distance of up to 1,200 meters. It is suitable for lift management applications where the additional relays can be connected to floor buttons. The PIRL is an economical dual element passive infra-red motion sensor that is compact, attractive & easy to install. The PIRL is ideal for commercial office and residential installations. The PIRL reduces false alarms to a very low level due to it's effective elimination of background noise and nuisance stimuli. The PIRL is designed for indoor use only and should not be mounted near large metal objects or metal surfaces. The STT804F 4 Channel Passive Video Balun enables the transmission of CCTV video signals to distances of 330 metres using economical CAT5e cable. The STT804F supports all CCTV cameras, monitors, DVR's, CCTV capture cards and most other video devices that normally utilise 75 Ohm coaxial cable. Up to 4 CCTV cameras can be transmitted on a single CAT5e cable. The video input is by either RJ45 or screw terminals, and the output is by BNC male connector. The AST4501 4 Channel Colour Quad processor provides an economical way to view 4 cameras simultaneously. The unit features 2 composite video outputs, programmable time & date stamp, PiP, names for each camera view and alarms for video loss and motion detect. The AST4501 is powered by a 12VDC plug pack (not supplied). The DS216 offers a cost effective solution for the control of numerous analogue and digital alarm points. The DDS DS216 board can control up to 16 digital supervised inputs and has 4 relay outputs. Equipped with an extension board EXT84 or EXTTCP84 it can control up to 24 inputs with 8 relay outputs. Each input is supervised, i.e. it controls the contact itself (open or close) and the status of the line (normal, short or cut). The status of each input and output is indicated by an LED. The S02M Maglock features 1200lbs holding force and 12 or 24 Volt DC operation. (AC input possible through a rectifier). Both voltages have the same holding force without temperature rise. The magnetic bond sensor indicates that proper bond exists between the magnet and the armature and that the door is locked. This can be monitored remotely to provide assurance that the door is secure. There is an LED for visual indication of the lock status.
Contact Us

To get in touch with a Sales Rep call us now on 1300 351 783 or Click HERE to send us your enquiry by email.
 
Login/Register
Search
Request Info

If you require more information click CLICK HERE and complete the simple web form.
 
Live Chat

Want to chat with us LIVE on Meebo? Click HERE to say gidday, ask a question, get a price, whatever.
 

EXTTCP TCP/IP Interface

Description

DDS has developed four extension cards and satellite to provide cost efficient solutions when additional inputs, TCP/IP or relays are needed. The extension boards are simply plugged onto the TPL controller boards. The EXTTCP allows a network of up to 32 control boards to be connected to the Local Area Network (LAN) via a 10/100 Base-T RJ45 port.

Features

  • Allows for connection of a DDS controller network on an Ethernet network
  • TCP/IP interface through 10/100 Base-T RJ45 connector
  • RS485 bus for connection of up to 31 additional control boards
  • Dimensions 120 x 100mm
  • Weight 75 grams
  • Operating Temperature -10°C to +55°C
  • Operating Voltage 12VDC±20%
 Click on picture for larger imageDDS EXTTCP TCP/IP Interface

Buy this Product Online

Buy online now at store.idme.biz

Additional Resources

Registered ID-Web members get exclusive access to additional resources including:
Brochures
Installation Manuals
Upload/Download Software
Up-to-Date Pricelists
Regular Emails with Product Alerts
Discounted prices at our Online Store
Direct Access to our Online Store

Login or Join Up

If you are already a My-ID member Login Here.
If you are not a member Click Here, complete the simple form and join today.
 

Other Products in this Category...