Power Supply Solutions | 13.8 Volt DC Power Supplies | ID-Me Security Wholesale Supplier

The AST27XDN 27x Digital Zoom Day/Night Camera has a built in 3.6-97.2mm lens with RS485 control and On Screen Display (OSD) to assist with in the field setup. The AST27XDN is a full body, or box style CCTV camera that provides a high resolution 480TVL image and requires a minimum scene illumination of only 0.5 lux. The camera can be setup in the field via the control buttons on the rear of the body. Zoom can also be controlled remotely via an RS485 controller.

The STT804F 4 Channel Passive Video Balun enables the transmission of CCTV video signals to distances of 330 metres using economical CAT5e cable. The STT804F supports all CCTV cameras, monitors, DVR's, CCTV capture cards and most other video devices that normally utilise 75 Ohm coaxial cable. Up to 4 CCTV cameras can be transmitted on a single CAT5e cable. The video input is by either RJ45 or screw terminals, and the output is by BNC male connector.

Designed for all size installations, powerful, yet easy to use, DDS TPL controllers are specially suited to high security on-line access control and real time alarm monitoring networks. The TPL controller manages lifts, parking, guard patrols, CCTV and Time & Attendance, in multiple sites with thousands of doors spread over remote locations and linked via TCP-IP, modem or RS232/485.

The AST69M2A IR CCTV Camera is housed in a weatherproof enclosure and features a varifocal lens, 540TV lines of resolution and an Infra Red range of 40 metres. The camera is supplied with an integral cable managed bracket suitable for mounting on most surfaces.

The DS216 offers a cost effective solution for the control of numerous analogue and digital alarm points. The DDS DS216 board can control up to 16 digital supervised inputs and has 4 relay outputs. Equipped with an extension board EXT84 or EXTTCP84 it can control up to 24 inputs with 8 relay outputs. Each input is supervised, i.e. it controls the contact itself (open or close) and the status of the line (normal, short or cut). The status of each input and output is indicated by an LED.

The H2TAG Tecom Format Access Control Smart Fob is a stylish read/write proximity keyfob compatible with Tecom Format Proximity Readers. The tags can be supplied with a printed number if required.

The S02M Maglock features 1200lbs holding force and 12 or 24 Volt DC operation. (AC input possible through a rectifier). Both voltages have the same holding force without temperature rise. The magnetic bond sensor indicates that proper bond exists between the magnet and the armature and that the door is locked. This can be monitored remotely to provide assurance that the door is secure. There is an LED for visual indication of the lock status.

The AST4501 4 Channel Colour Quad processor provides an economical way to view 4 cameras simultaneously. The unit features 2 composite video outputs, programmable time & date stamp, PiP, names for each camera view and alarms for video loss and motion detect. The AST4501 is powered by a 12VDC plug pack (not supplied).

Contact Us

To get in touch with a Sales Rep call us now on 1300 351 783 or Click HERE to send us your enquiry by email.

Login/Register

Search

Request Info

If you require more information click CLICK HERE and complete the simple web form.

Live Chat

Want to chat with us LIVE on Meebo? Click HERE to say gidday, ask a question, get a price, whatever.

PS3A138 13.8Volt, 3 Amp Power Supply

Description The PS3A138 Linear Power Supply provides a regulated 13.8VDC output at up to 3 Amps continuously. The power supply also provides an output for current limited backup battery charging circuit and is supplied in a powder coated lockable steel enclosure. The PS3A138 is suitable for access control systems, alarmss...

PS13-1E 13.8VDC, 1 Amp Power Supply Module

Description The PS13-1E, Linear Regulated Power Supply Module from Tactical Technologies has been designed to provide 13.8V DC at 1 Amp. The PS13-1E features an onboard battery charger with LED indication to show the presence of DC. This module is supplied with 4 x adhesive mounting stand-offs and requires an approved 16VAC 1.5...

PS13-1B 13.8VDC, 1 Amp Power Supply

Description The Tactical Technologies PS13-1B, Linear Regulated Power Supply provides 13.8V DC nominal at 1 Amp. The PS13-1B features an onboard battery charger with LED indication to show the presence of DC. Housed in a powder coated steel enclosure (large enough to house a 1.2Ah or 4Ah Sealed Lead Acid Battery) and supplied...

TPS13-2.5Si 13.5VDC, 2.5 Amp Power Supply

Description The Tactical Technologies TPS13-2.5Si provides 13.5VDC at up to 2.5 Amps via its primary output channel (to power loads such as Access Control systems), whilst a separate 13.8VDC 500mA channel keeps your standby battery charged, making TPS13-2.5Si a 3 Amp supply. Incorporating short circuit shutdown, current limiting...

TPS13-2.5SiB 13.5VDC, 2.5 Amp Power Supply

Description The TPS13-2.5SiB Linear Regulated Power Supply provides a continuous 13.5VDC at up to 2.5 Amps via its primary output channel to power loads such as Access Control systems, whilst a separate 13.8VDC 500mA channel keeps your standby battery charged, making the TPS13-2.5SiB a 3 Amp supply. The TPS13-2.5SiB is supplied...

TPS13-5Si 13.5VDC, 5 Amp Power Supply

Description The Tactical Technologies TPS13-5Si provides 13.5VDC at up to 5 Amps via its primary output channel (to power loads such as Access Control systems), whilst a separate 13.8VDC 700mA channel keeps your standby battery charged, making the TPS13-5Si a 5.7 Amp supply. Incorporating short circuit shutdown, current...

TPS13-10SWB 13.8Volt, 10Amp Power Supply

Description The Tactical Technologies TPS13-10SWB is a fully regulated switch mode power supply providing 13.8 volts DC at 10 Amps. Due to its switch mode design, the TPS13-10SWB generates significantly less heat than equivalent supplies of linear design. Mounted in a powder coated steel, tampered enclosure with a rear cutout...